It is not wrong to say the strength of pipe line can be judged by the presence of weakest connection in the pipes system. There are many methods that are used for the joining of HDPE pipe Australia. Every connecting system has its own advantages and disadvantages.

Butt fusion or butt welding jointing system is the thermo fusion process which has the involvement of heating the ends of the components pipes simultaneously that are suppose to be joined. It is heated till a melting stage is achieved on every contact surface. This ensures efficient flowing, permanent and economical connections.

The two surfaces of the melted pipes are brought under contact of each other under a controlled level of pressure for the particular cooling time.  When cooling is started, formation of homogeneous fusion takes place. There is end force resistance in the joining pipes and marks its comparable performance under the pipe pressure.

The method of joining pipes like this, needs a heated plate electrically for raising the temperature of the end of pipes for the temperature of the fusion that is required. It is used for the PE100, PE80 and PE63 material’s grades for the pipes of sizing 32 mm and more than that SDR ( standard dimension ratio). When you are planning to join pipes using the technique of Butt welding, than follow the below steps for making butt weld joint system.

The fusion point must have a stable and clean environment for having conducive environment for reproducibility and repeatability. The equipment to be used must appropriate and cleaned. You must ensure for the usage of professional trainers. Procedures of preliminary welding must be drawn. Procedures of preliminary welding must be in accordance for doing welding. Welded section must be visually inspected. Mechanical tests must be performed on the welded areas. You must make changes in the processes, Until pass status is achieved by all of them. Welding processes must be continued and surety must be made for recording all of the important parameters.  You can even use check  sheets for ensuring tracking of all essential parameters and steps is done accurately .

Electrofusion is the another heating process done for the joining of pipes. Electro fusion welders use poly pipe scrapers and technology of electro fusion for the joining of the joints of pipes.  Polyethylene pipes are joined very efficiently, cost effectively and safely in the contemporary times. The heating is done with electricity for melting both of ends of pipes and its surface. The method is pointed for being strongest than the pipes itself even for the creation of homogeneous joint points. The process is marked for its versatility as the pipes are welded that are of different thickness and various PE materials and thickness. Visit this link https://www.matrixpiping.com.au/ if you need polyethylene pipe fittings,